designing and manufacturing innovative frequency control devices since 1927 502 via del monte, oceanside, ca 92054 tel: 760.433.4510 fax: 760.434.0255 monitor products company inc reserves the right to make changes to its products and product specifications without notice. no liability is assumed as a result of their use or application. 07-02-01 sm60 units = mm specifications frequency range 9.8304 mhz ~ 100.0 mhz* operating temp range -10 1 c ~ 60 1 c storage temp range -40 1 c ~ 85 1 c shunt capacitance 7.0 pf max calibration tolerance ! 10ppm, ! 25ppm & ! 50ppm options available @ 25 1 c frequency tolerance ! 50ppm from -10 1 c ~ 60 1 c standard vs temp range (call for other options) equivalent series 9.8304 ~ 9.9999 = 80 resistance 10.0000 ~ 15.9999 = 60 (mhz = ? max) 16.0000 ~ 32.0000 = 40 fundamental unless otherwise 28.0000 ~ 83.9999 = 60 (3rd overtone) otherwise indicated 84.0000 ~ 100.0000 = 80 (5th overtone) drive level 0.1 mw max humidity 85% rh, 85 1 c, 48 hours hermetic seal leak rate 2 x 10 -8 atm-cm 3 /sec max solderability mil-std-202f method 208e vibration mil-std-202f method 204 / 35g, 50~2000 hz (<25.0 mhz) / 20g, 50~2000 hz (25.0 mhz) shock mil-std-202f method 213b test cond e, 1000g, 1/2 sine wave packaging 16mm tape & reel (1000pcs/reel std, or bulk <1000pcs) * call for your specific frequency requirement applications m wireless rf m pcmcia m cameras m disk drives m pdas features m ultra-slim 1.0mm profile m surface mount m reflow solderable at 260 1 c for 10 secs max m tape & reel (1000pcs/reel) monitor?s sm60 provides a miniature crystal in a highly reliable package that is specifically designed for surface mount applications. hermetically-sealed construction ensures long term stability and exceptional aging characteristics. miniature, ceramic, surface mount crystal sm60
502 via del monte, oceanside, ca 92054 tel: 760.433.4510 fax: 760.434.0255 monitor products company inc reserves the right to make changes to its products and product specifications without notice. no liability is assumed as a result of their use or application. 07-02-01 anti-resonance parallel: crystals operating at anti-resonance will look inductive in the circuit. changes of reactive values in the circuit will change the crystal frequency. if the crystal is to be used at anti-resonance, the load capacitance should always be specified. the load capacitance c l is the dynamic capacitance of the total circuit as measured across the crystal terminals. series resonance: at series resonance, the crystal looks resistive in the circuit, and correlation of frequency is not a problem. it must be specified if unit is to be manufactured at series or at a particular load capacitance. crystal correlation theory part numbering key sm60n1c1e = @ 32.256 mhz sample part number n 1 c e l = 12 pf m = 15 pf n = 20 pf o = 32 pf q = 24 pf r = 18 pf s = series resonant x = cust spec correlation packaging mode a = bulk (<1000 pcs) e = tape & reel* (1000 pcs/reel) x = cust spec frequency stability f = ! 10 ppm e = ! 25 ppm c = ! 50 ppm x = cust spec 1 temp range 1 = - 10 1 c ~ 60 1 c* 3 = - 20 1 c ~ 70 1 c 5 = - 40 1 c ~ 85 1 c 9 = cust spec sm80 series sm60 1 = fundamental* 3 = 3rd overtone 5 = 5th overtone 32.256 frequency * standard call factory for additional options. use full descriptive part number when ordering. parts will be marked with se ries and frequency only. sm60 tape dimensions (1000 pcs/reel) reel dimensions units = mm monitor products has a proven track record as a pioneer manufacturer in the frequency control market. if our extensive selectio n of standard and engineered crystals and oscillators does not meet your spec, we will work with you towards a customized solution.
|
